Environmental Engineer 履歷範例(依資歷分級,2026)

Updated April 13, 2026
Quick Answer

Environmental Engineer 履歷範例:能通過 ATS 篩選的實證範本

光是 PFAS 整治市場預計到 2034 年就將達到 29.6 億美元,而 2024 年全球前 200 大環境顧問公司的環境服務營收總計達 1,786 億美元——然而未來十年間,每年預計僅有約 3,000 個...

Environmental Engineer 履歷範例:能通過 ATS 篩選的實證範本

光是 PFAS 整治市場預計到 2034 年就將達到 29.6 億美元,而 2024 年全球前 200 大環境顧問公司的環境服務營收總計達 1,786 億美元——然而未來十年間,每年預計僅有約 3,000 個 Environmental Engineer 職缺,使每一次履歷投遞都是在極有限的座位上進行的高風險競爭。

TL;DR

能拿到面試的環境工程履歷會:量化整治成果、點名法規框架(RCRA、CERCLA、CWA、CAA)、列出建模工具並附專案情境,並以 PE 執照或明確的取證路徑開場。以下入門、中階與資深三份履歷範例,具體示範如何將環境工程工作轉換為 ATS 友善且能打動招募者的文件。

為什麼這個角色很重要

根據美國勞工統計局,環境工程師在 2024 年約有 39,400 個職位,年薪中位數為 104,170 美元。最低 10% 年薪低於 64,950 美元,而最高 10% 則超過 161,910 美元。預計 2024–2034 年就業成長 4%,與所有職業的平均大致相當。 但這些數字低估了此角色正在擴張的範疇。PFAS「永久化學物質」法規正驅動數十億美元的處理基礎建設支出——Veolia 在 2025 年啟用美國最大規模的 PFAS 處理廠之一,服務超過 10 萬名居民。Jacobs 獲得美國空軍 15 億美元上限的環境服務合約,用於全球環境復原。氣候韌性規劃、ESG 揭露要求與碳捕集許可正在創造五年前尚未存在的需求專長。 對環境工程師而言,履歷是徵才經理看到的第一份「法規文件」。它必須精準、有證據支持、技術上可信。以下範例將示範如何做到這點。

履歷範例 1:入門 Environmental Engineer(0–3 年)

**SARAH CHEN, EIT** Philadelphia, PA 19103 | (215) 555-0147 | [email protected] | linkedin.com/in/sarahchen-enveng

Professional Summary

Environmental engineer-in-training with FE Environmental certification and 2 years of field and modeling experience at a Top 200 environmental firm. Conducted Phase I and Phase II ESAs across 18 commercial properties in the Philadelphia metro area. Proficient in MODFLOW groundwater modeling, AutoCAD Civil 3D site design, and EPA Method 8260 VOC analysis. Seeking a staff engineer role where PFAS remediation and stormwater compliance projects leverage hands-on sampling and data analysis skills.

Education

**B.S. Environmental Engineering** — Drexel University, Philadelphia, PA Graduated May 2023 | GPA: 3.72/4.0 Relevant Coursework: Groundwater Hydrology, Air Pollution Control, Hazardous Waste Management, Environmental Chemistry

Certifications

  • **Engineer-in-Training (EIT)** — Pennsylvania State Board, License #ET-078432 (2023)
  • **40-Hour HAZWOPER** — OSHA 29 CFR 1910.120 (2023, 8-hour refresher 2024)
  • **OSHA 10-Hour Construction Safety** (2022)

Technical Skills

MODFLOW 6 | AutoCAD Civil 3D | ArcGIS Pro | EPA-SWMM 5.2 | R (statistical analysis) | EPA Methods 8260/8270 | EQuIS data management | Microsoft Project

Professional Experience

**Staff Environmental Engineer** Tetra Tech, Inc. — Philadelphia, PA | June 2023 – Present

  • Conducted 18 Phase I Environmental Site Assessments per ASTM E1527-21 across commercial and industrial parcels totaling 142 acres, identifying 6 recognized environmental conditions (RECs) that triggered Phase II investigations
  • Collected 340+ soil, groundwater, and soil gas samples across 7 CERCLA and RCRA-regulated sites, maintaining 99.2% chain-of-custody compliance with zero QA/QC rejections over 14 months
  • Built a MODFLOW 6 groundwater flow model for a 28-acre former manufacturing site, calibrating head residuals to within 0.3 ft RMSE across 24 monitoring wells, which informed a pump-and-treat remediation design reducing estimated cleanup timeline by 2 years
  • Drafted 12 stormwater pollution prevention plans (SWPPPs) for construction sites ranging from 3 to 47 acres, achieving 100% compliance during 8 regulatory inspections by PA DEP
  • Analyzed VOC and SVOC laboratory data using EPA Methods 8260 and 8270 for 4 Brownfield redevelopment projects, identifying trichloroethylene (TCE) exceedances in 3 monitoring wells that redirected remedial strategy
  • Reduced field reporting turnaround from 10 days to 4 days by designing an EQuIS data import template that automated 60% of manual data entry for a 15-person project team **Environmental Engineering Co-op** AECOM — Conshohocken, PA | September 2021 – March 2022
  • Assisted with groundwater monitoring at 5 active Superfund sites across southeastern Pennsylvania, logging 120+ well readings and maintaining piezometer calibration records
  • Prepared 8 air emission calculations for Title V permit renewal applications using AP-42 emission factors, supporting a 340,000 sq ft pharmaceutical manufacturing facility's compliance deadline
  • Created ArcGIS maps for 3 remedial investigation reports, digitizing 200+ sampling locations and generating contaminant plume interpolations that were incorporated into final RI/FS deliverables

Projects

**Senior Design Capstone — Stormwater Green Infrastructure Design** Drexel University | September 2022 – June 2023

  • Designed a bioretention and permeable pavement system for a 12-acre urban campus parcel, modeling 25-year storm events in EPA-SWMM 5.2 and demonstrating 78% peak flow reduction compared to conventional drainage
  • Presented findings to Philadelphia Water Department engineers; design concepts were incorporated into the university's 2024 Green Infrastructure Master Plan

履歷範例 2:中階 Environmental Engineer(5–10 年)

**MARCUS RIVERA, PE, CHMM** Denver, CO 80202 | (303) 555-0293 | [email protected] | linkedin.com/in/marcusrivera-pe

Professional Summary

Licensed Professional Engineer with 8 years designing remediation systems for RCRA corrective action and CERCLA Superfund sites, managing project budgets up to $4.2M. Led PFAS investigation and treatment design for 3 municipal water systems serving a combined 85,000 residents. Certified Hazardous Materials Manager with deep expertise in MODFLOW, AERMOD, and GIS-based environmental data visualization. Track record of delivering projects 12–18% under budget while meeting aggressive regulatory deadlines at Arcadis and WSP.

Education

**M.S. Environmental Engineering** — Colorado School of Mines, Golden, CO (2018) Thesis: "Optimizing Granular Activated Carbon Adsorption for PFAS Removal in Municipal Groundwater Systems" **B.S. Civil and Environmental Engineering** — University of Colorado Boulder (2016)

Licenses & Certifications

  • **Professional Engineer (PE)** — Colorado DORA, License #PE-47823 (2020)
  • **Certified Hazardous Materials Manager (CHMM)** — IHMM, #18294 (2021)
  • **LEED AP BD+C** — GBCI, #10987432 (2019)
  • **40-Hour HAZWOPER** + annual 8-hour refreshers (2016–present)
  • **OSHA 30-Hour Construction Safety** (2017)

Technical Skills

MODFLOW 6 / Visual MODFLOW Flex | AERMOD View | GMS (Groundwater Modeling System) | AutoCAD Civil 3D | ArcGIS Pro & ArcGIS Online | EPA-SWMM 5.2 | BREEZE AERMOD | HEC-RAS 6.0 | EQuIS | Enviro Data | R / Python (data analysis) | Microsoft Project / Primavera P6

Professional Experience

**Senior Environmental Engineer / Project Manager** Arcadis — Denver, CO | March 2021 – Present

  • Managed a $4.2M RCRA corrective action program for a 67-acre former refinery, overseeing design and construction of a dual-phase extraction (DPE) system with 32 extraction wells that reduced dissolved-phase BTEX concentrations by 89% across the plume core within 18 months
  • Led PFAS site investigation for a Colorado municipal water authority serving 45,000 residents, designing a sampling program across 28 production wells, identifying PFOA/PFOS exceedances at 7 wells (12–340 ppt), and delivering a granular activated carbon (GAC) treatment design within the $2.8M budget approved by the water board
  • Directed a team of 6 engineers and 4 field technicians on a Superfund remedial design for a 120-acre mining site, producing a 340-page remedial design document accepted by EPA Region 8 with zero substantive comments during public review
  • Developed AERMOD air dispersion models for 5 industrial facilities seeking Title V permit modifications, demonstrating compliance with NAAQS for PM2.5 and SO2 within 500 meters of facility boundaries
  • Negotiated a 14-month cleanup schedule extension with CDPHE that saved the client $620,000 in mobilization costs by consolidating 3 separate remediation phases into a single construction event
  • Mentored 4 junior engineers through the PE exam preparation process; 3 of 4 passed on first attempt **Environmental Engineer II** WSP USA — Denver, CO | August 2018 – February 2021
  • Designed and permitted a 1.2 MGD constructed wetland treatment system for a former mining site in Leadville, CO, achieving 94% removal of dissolved metals (Zn, Mn, Fe) and meeting Colorado Discharge Permit Regulation 31 effluent limits within 6 months of commissioning
  • Prepared 22 SPCC plans for petroleum storage facilities across Colorado and Wyoming totaling 3.4 million gallons of aggregate storage capacity, with all plans accepted by EPA Region 8 on first submission
  • Built MODFLOW-SURFACT models for 3 contaminant transport investigations, calibrating against 5+ years of quarterly monitoring data from 60 wells, and demonstrating that natural attenuation would achieve MCLs for vinyl chloride within 8 years — saving the client $1.8M compared to active remediation alternatives
  • Conducted 15 RCRA Facility Investigations (RFIs) at petroleum refineries and chemical manufacturing plants, producing investigation reports that resulted in zero CDPHE Notices of Violation across all 15 sites
  • Managed $180,000 annual subcontractor budget for laboratory analytical services, negotiating a 12% volume discount with TestAmerica (now Eurofins) that was adopted firm-wide for Rocky Mountain region projects **Staff Environmental Engineer** WSP USA — Denver, CO | July 2016 – July 2018
  • Performed quarterly groundwater monitoring at 9 LUST (Leaking Underground Storage Tank) sites, collecting 430+ samples over 2 years and maintaining EPA-compliant sampling protocols across all events
  • Authored 6 Risk-Based Corrective Action (RBCA) closure reports for petroleum-contaminated sites, achieving No Further Action (NFA) determinations from the Colorado OPS for all 6 sites within an average of 14 months
  • Assisted with the design of a soil vapor extraction (SVE) system for a dry-cleaning solvent (PCE) plume, sizing 8 extraction wells and 2 blowers that achieved 97% VOC mass removal within the first 12 months of operation

履歷範例 3:資深 Environmental Engineer / Director(12 年以上)

**DR. JENNIFER OKAFOR, PE, BCEE, QEP** Houston, TX 77002 | (713) 555-0418 | [email protected] | linkedin.com/in/jenniferokafor-pe

Professional Summary

Board-certified environmental engineer and licensed PE with 16 years leading remediation, compliance, and sustainability programs for Fortune 500 energy clients and federal agencies. Directed $38M in environmental project portfolios across 4 states, including a $12M PFAS treatment plant serving 100,000+ residents. Published 9 peer-reviewed papers on in-situ remediation and carbon sequestration. Currently driving climate resilience and ESG strategy integration at a global Top 5 environmental consultancy.

Education

**Ph.D. Environmental Engineering** — Rice University, Houston, TX (2012) Dissertation: "Enhanced In-Situ Bioremediation of Chlorinated Solvents in Fractured Bedrock Aquifers" **M.S. Environmental Engineering** — Georgia Institute of Technology, Atlanta, GA (2009) **B.S. Chemical Engineering** — Howard University, Washington, DC (2007)

Licenses & Certifications

  • **Professional Engineer (PE)** — Texas Board, License #124789 (2014); also registered in Louisiana, Oklahoma, Colorado
  • **Board Certified Environmental Engineer (BCEE)** — AAEES (2018)
  • **Qualified Environmental Professional (QEP)** — IPEP (2016)
  • **LEED AP O+M** — GBCI (2015)
  • **CHMM** — IHMM (2013)
  • **40-Hour HAZWOPER** + annual refreshers (2008–present)

Technical Skills

MODFLOW-USG / MODPATH | AERMOD / CALPUFF | GMS 10 | Visual MODFLOW Flex | TOUGH2 (multiphase flow) | ArcGIS Enterprise | AutoCAD Civil 3D | BREEZE AERMOD Suite | EPA-SWMM | HEC-HMS | R / Python / SQL | Power BI | Primavera P6 | SAP EHS Module

Professional Experience

**Vice President, Environmental Services** Jacobs — Houston, TX | January 2020 – Present

  • Direct a portfolio of $38M in active environmental projects across Texas, Louisiana, Oklahoma, and Colorado, supervising 28 engineers, scientists, and technicians while maintaining 94% client retention over 5 years
  • Secured the environmental engineering scope on a $1.5B U.S. Air Force AFCEC environmental services contract, leading the technical proposal that scored highest among 7 competing firms and positioning Jacobs for $240M in task order revenue over the contract ceiling period
  • Designed and oversaw construction of a $12M PFAS treatment plant using granular activated carbon and ion exchange resin for a Gulf Coast municipality, achieving PFOA/PFOS effluent concentrations below 4 ppt (EPA MCL: 4 ppt) within 90 days of commissioning for a system treating 8.4 MGD
  • Led the firm's climate resilience practice for the Gulf Coast region, completing vulnerability assessments for 14 petrochemical facilities along the Houston Ship Channel and developing adaptation plans that secured $18M in client capital investments for flood protection and process safety upgrades
  • Developed ESG environmental metric reporting framework adopted by 3 Fortune 500 energy clients, integrating Scope 1/2/3 emissions tracking with remediation liability accounting, which was cited as a best practice in one client's 2024 annual sustainability report
  • Won the Jacobs Chairman's Award for Technical Excellence (2023) for developing a novel enhanced bioremediation approach that reduced chlorinated solvent treatment costs by 40% compared to conventional pump-and-treat at a 54-acre petrochemical site **Associate Vice President, Environmental Engineering** AECOM — Houston, TX | June 2015 – December 2019
  • Managed a $16M environmental remediation program for a decommissioned 280-acre Gulf Coast refinery under Texas Commission on Environmental Quality (TCEQ) Voluntary Cleanup Program oversight, achieving Affected Property Assessment Reports (APARs) for all 12 assessment areas within 30 months
  • Directed AERMOD and CALPUFF air dispersion modeling for 8 major industrial facilities applying for PSD (Prevention of Significant Deterioration) permits, demonstrating NAAQS compliance for NOx, SO2, and PM2.5 in all 8 applications with zero EPA objections
  • Oversaw design and installation of a $3.4M in-situ chemical oxidation (ISCO) system injecting 42,000 gallons of activated sodium persulfate into a TCE/DCE plume beneath a 36-acre former aerospace manufacturing facility, reducing source zone concentrations by 96% within 24 months
  • Built a 12-person environmental due diligence team that completed 87 Phase I ESAs and 23 Phase II ESAs in a single calendar year for a REIT client acquiring industrial and logistics properties, identifying environmental liabilities totaling $14.2M that directly influenced purchase price negotiations
  • Implemented a GIS-based environmental data management system using ArcGIS Online that consolidated monitoring data from 340 wells across 9 sites into a single dashboard, reducing quarterly reporting preparation time by 35% (from 120 to 78 person-hours per cycle) **Senior Environmental Engineer** Tetra Tech — Houston, TX | July 2012 – May 2015
  • Served as lead remediation engineer for 4 CERCLA Superfund sites in EPA Region 6, managing $8.6M in combined remediation budgets and meeting all 16 EPA milestone deadlines over 3 years
  • Designed a monitored natural attenuation (MNA) program for a petroleum hydrocarbon plume at a former bulk fuel terminal, demonstrating first-order degradation rates of 0.3–0.7/year for BTEX compounds through 3 years of quarterly monitoring data from 44 wells, resulting in TCEQ approval of MNA as the final remedy — saving the responsible party $2.1M compared to active treatment
  • Published 4 peer-reviewed papers in Environmental Science & Technology and the Journal of Contaminant Hydrology on enhanced bioremediation techniques, garnering 180+ combined citations
  • Trained 15 junior engineers on RCRA corrective action procedures and TCEQ regulatory requirements through a structured 6-month mentorship program

Publications (Selected)

  1. Okafor, J.N., et al. (2022). "PFAS Treatment Optimization Using GAC-IX Hybrid Systems in Municipal Groundwater." *Environmental Science & Technology*, 56(14), 10234–10245.
  2. Okafor, J.N., et al. (2019). "Enhanced In-Situ Bioremediation of Chlorinated Ethenes in Fractured Bedrock: A Field-Scale Demonstration." *Journal of Contaminant Hydrology*, 225, 103498.
  3. Okafor, J.N., et al. (2017). "Carbon Sequestration Potential of Engineered Wetland Systems: A Lifecycle Assessment." *Water Research*, 112, 89–101.

Environmental Engineer 履歷的 ATS 關鍵字

環境顧問公司與工業雇主的申請人追蹤系統會掃描技術層面的具體性。請在這些詞彙真正反映你的經驗時加入履歷:

法規與合規

RCRA | CERCLA/Superfund | Clean Water Act (CWA) | Clean Air Act (CAA) | TSCA | NEPA | NPDES | SPCC | Title V | PSD | TMDL | Phase I ESA | Phase II ESA | ASTM E1527-21 | Brownfield | Voluntary Cleanup Program | NFA determination

建模與軟體

MODFLOW | AERMOD | CALPUFF | EPA-SWMM | HEC-RAS | HEC-HMS | GMS | Visual MODFLOW | TOUGH2 | AutoCAD Civil 3D | ArcGIS Pro | ArcGIS Online | EQuIS | Enviro Data | R | Python | Power BI

整治技術

Pump-and-treat | Dual-phase extraction | Soil vapor extraction (SVE) | In-situ chemical oxidation (ISCO) | Enhanced bioremediation | Monitored natural attenuation (MNA) | Granular activated carbon (GAC) | Ion exchange resin | Air sparging | Permeable reactive barrier

污染物與分析物

PFAS/PFOA/PFOS | VOCs | SVOCs | BTEX | TCE/PCE/DCE | Heavy metals | Petroleum hydrocarbons | PAHs | PCBs | Dioxins/furans

新興專長

PFAS remediation | Climate resilience | ESG reporting | Carbon capture and sequestration | Green infrastructure | Stormwater management | Environmental justice | Sustainability

技能剖析

必備技術能力

技能 為什麼重要 如何展現
Groundwater modeling (MODFLOW) 整治專案的核心交付項目 "Calibrated MODFLOW model across 24 wells with 0.3 ft RMSE"
Air dispersion modeling (AERMOD) Title V 與 PSD 許可申請必備 "Demonstrated NAAQS compliance for PM2.5 within 500m of facility"
GIS (ArcGIS Pro) 空間資料分析是場址調查的核心 "Created contaminant plume maps for 12 RI/FS reports"
法規知識 (RCRA, CERCLA, CWA) 每個專案都在法規框架下運作 "Managed 15 RFIs with zero Notices of Violation"
現場採樣與 QA/QC 所有環境資料的基礎 "Maintained 99.2% chain-of-custody compliance across 340+ samples"
資料管理 (EQuIS) 業界標準的環境資料庫 "Designed EQuIS import template that reduced data entry by 60%"
雨水設計 (SWMM, HEC-RAS) 綠色基礎建設要求帶來的需求成長 "Modeled 25-year storm events demonstrating 78% peak flow reduction"

能贏得面試的軟實力

技能 情境
法規談判 與 EPA、州級機關合作,形塑清理時程並為客戶省下成本
客戶溝通 將複雜的技術發現轉譯為可執行的商業決策
專案管理 在多年期整治計畫中平衡範疇、預算與時程
跨領域協作 與地質學家、化學家、營建經理與律師合作
技術寫作 產出能在首次送審即通過機關審查的法規交付文件
指導後進 引導初階工程師取得 PE 執照——87% 的資深職位要求

Environmental Engineer 履歷常見錯誤

1. 列出軟體卻沒有專案情境

**錯誤:** "Proficient in MODFLOW, AERMOD, AutoCAD, ArcGIS" **正確:** "Built MODFLOW 6 groundwater model for 28-acre site, calibrating head residuals to 0.3 ft RMSE across 24 monitoring wells" 透過專案情境具體說明軟體專業的環境工程師——例如「Used AutoCAD for 15+ remediation site designs」——表現優於只列工具名稱者。招募者表示他們在專案區段清晰劃分的履歷上多花 31% 的時間閱讀。

2. 忽視法規框架

你的履歷應該點名你曾在哪些具體法規下工作。「Prepared environmental reports」對徵才經理來說毫無意義。「Completed 15 RCRA Facility Investigations at petroleum refineries with zero CDPHE Notices of Violation」則顯示你理解法規環境並能在不製造責任的情況下運作其中。

3. 省略 PE 執照路徑

87% 的資深環境工程職位要求 PE 執照。如果你有,請在專門章節列出執照的州與編號——不要埋在技能欄中。若你有 EIT/FE,也請醒目列出並註明預計參加 PE 考試的日期。對執照保持沉默會引起疑問。

4. 使用空泛的環境詞彙

「passionate about sustainability」或「committed to environmental protection」這類片語浪費了應該放置技術證據的空間。每一句話都應包含:一個數字、一項法規、一項工具、一種污染物,或一項交付物。「Reduced facility emissions by 32%」展示影響——「environmental monitoring experience」則不。

5. 未量化整治成果

環境工程本質上就是可測量的成果:濃度降低、成本節省、合規率、時程改善。「Managed remediation project」是職位說明條目。「Reduced dissolved-phase BTEX by 89% across plume core within 18 months through 32-well DPE system」才是履歷條目。

6. 低估 PFAS 經驗

PFAS 是當前環境工程最大的成長動能——市場預計到 2034 年達 29.6 億美元。若你有任何 PFAS 採樣、調查、處理設計或法規經驗,都應醒目呈現。徵才經理正在積極尋找這項專長。

7. 送出密集、多頁的文字牆

技術深度重要,格式同樣重要。請使用清楚的章節標題、一致的條列格式與適當的留白。工程公司會使用 ATS 系統,且 93% 的徵才經理偏好 1–2 頁的履歷。一份兩頁卻技術內容紮實的履歷,勝過四頁卻難以解析的履歷。

專業摘要範例

入門(0–3 年)

"Environmental engineer-in-training with FE Environmental certification and 2 years of field experience at a Top 200 environmental firm. Conducted 18 Phase I/II ESAs per ASTM E1527-21, collected 340+ soil and groundwater samples at CERCLA and RCRA sites with 99.2% chain-of-custody compliance, and built MODFLOW groundwater models for Brownfield remediation design. 40-Hour HAZWOPER certified with hands-on experience in EPA Methods 8260/8270 VOC and SVOC analysis."

中階(5–10 年)

"PE-licensed environmental engineer with 8 years designing remediation systems for RCRA corrective action and CERCLA Superfund sites, managing budgets up to $4.2M. Led PFAS investigation and GAC treatment design for 3 municipal water systems (combined 85,000 residents served). CHMM and LEED AP BD+C certified. Delivered projects averaging 15% under budget while meeting all regulatory milestones at Arcadis and WSP."

資深 / Director(12 年以上)

"Board-certified environmental engineer (BCEE) and multi-state PE with 16 years directing $38M in remediation, compliance, and climate resilience programs for Fortune 500 energy clients and federal agencies. Designed a $12M PFAS treatment plant achieving sub-4 ppt PFOA/PFOS effluent. Published 9 peer-reviewed papers on in-situ remediation. Led the winning technical proposal on a $1.5B AFCEC environmental services contract."

常見問題

我需要 PE 執照才能擔任環境工程師嗎?

入門職位不需要,但方向很明確:87% 的資深環境工程職位需要。你需要先通過 Fundamentals of Engineering(FE)考試,除了學位外沒有其他經驗要求。累積 4 年在持有 PE 的工程師下的合格工程經驗後,你就能參加 NCEES 主辦的 PE Environmental 考試。請在履歷上列出你的 EIT 狀態與預計取得 PE 的時間表——徵才經理想看到你走在這條路上。

PE 以外,哪些認證最重要?

CHMM(Certified Hazardous Materials Manager)是整治相關職位中 PE 之外最強的補充,要求學士學位加 4 年危險物質經驗。40-Hour HAZWOPER 是任何在受污染場址做現場工作者的基本要求——沒有它你無法合法進入危險廢棄物場址。LEED AP(BD+C 或 O+M)象徵綠建築與永續專業,隨著 ESG 要求擴張愈來愈相關。QEP(Qualified Environmental Professional)與 BCEE(Board Certified Environmental Engineer)則是區分 Director 層級候選人的資深認證。

如果我的經驗橫跨顧問業與產業端,該如何處理履歷?

這很常見且其實是優勢。顧問業經驗(Arcadis、Tetra Tech、AECOM、WSP、Jacobs)展現廣度——多位客戶、多種法規框架、多種污染物類型。產業端經驗(在煉油廠、製造商或公用事業服務)則展現深度——從業主角度理解運營限制、預算週期與利害關係人管理。在履歷上,請依交付物與成果框架每段職位,而非僅依環境設定。無論你是為顧問客戶還是自家設施執行 Phase II ESA,它都是 Phase II ESA。

環境工程師應該學哪些程式語言?

R 與 Python 最具價值。R 在環境統計上廣泛使用——監測資料趨勢分析、對法規標準的統計比較,以及 Monte Carlo 風險評估。Python 在資料處理自動化、GIS 腳本(arcpy),以及將環境資料庫連結到視覺化工具上愈來愈重要。如果你使用 EQuIS 或任何關聯式環境資料庫,SQL 是必要的。Power BI 或 Tableau 則讓資料視覺化的工具組更完整。你不需要成為軟體開發者——你需要展現能處理現代環境專案所產生的資料規模。

2026 年的履歷上 PFAS 經驗有多重要?

非常重要。PFAS 整治服務市場在 2025 年達 10.2 億美元,預計到 2034 年達 29.6 億美元。EPA 已將飲用水中 PFOA 與 PFOS 的 maximum contaminant levels(MCLs)定為每兆分之 4,且各州正實施自己(往往更嚴格)的標準。美國國防部已在各軍事設施資助重大 PFAS 示範專案。若你有任何 PFAS 相關經驗——採樣、調查、處理設計、法規合規或風險評估——都請醒目呈現。這不是趨勢;這是環境工程需求的結構性轉變。

我該列出發表文章與研討會簡報嗎?

要,尤其是當你鎖定資深或 principal engineer 職位,或研究導向公司的職位時。環境工程重視對領域的技術貢獻。在 Environmental Science & Technology、Journal of Contaminant Hydrology 或 Water Research 等期刊發表的論文具有分量。在 ASCE、AWMA 或 Battelle 的研討會簡報展現思想領導力。對入門候選人而言,學術研究或 capstone 專案簡報也適合列入。請以標準學術格式列出引用,包含期刊名稱、卷期與頁碼。

引用來源

  1. Bureau of Labor Statistics. "Environmental Engineers — Occupational Outlook Handbook." U.S. Department of Labor, 2024. https://www.bls.gov/ooh/architecture-and-engineering/environmental-engineers.htm
  2. Bureau of Labor Statistics. "Occupational Employment and Wages, May 2024 — Environmental Engineers (17-2081)." https://www.bls.gov/oes/2023/may/oes172081.htm
  3. O*NET OnLine. "17-2081.00 — Environmental Engineers." National Center for O*NET Development. https://www.onetonline.org/link/summary/17-2081.00
  4. Engineering News-Record. "ENR 2025 Top 200 Environmental Firms: Facing New Realities." 2025. https://www.enr.com/articles/61545-enr-2025-top-200-environmental-firms-facing-new-realities
  5. Global Growth Insights. "PFAS Remediation Services Market — Size, Share, Growth, 2025." https://www.globalgrowthinsights.com/market-reports/pfas-remediation-services-market-101518
  6. NCEES. "PE Exam — Environmental." National Council of Examiners for Engineering and Surveying. https://ncees.org/exams/pe-exam/environmental/
  7. Institute for Hazardous Materials Management. "Certified Hazardous Materials Manager (CHMM)." https://www.ihmm.org/
  8. U.S. EPA. "Storm Water Management Model (SWMM)." https://www.epa.gov/water-research/storm-water-management-model-swmm
  9. Waste Dive. "DOD-Funded PFAS Demo Projects Show Promise for Remediation and Destruction." 2025. https://www.wastedive.com/news/dod-pfas-destruction-disposal-demos-waste/805991/
  10. Z2Data. "2025 ESG and Environmental Regulation Review and 2026 Preview." https://www.z2data.com/insights/2025-esg-and-environmental-regulation-review-and-2026-preview

使用 Resume Geni 建立 ATS 優化的履歷 — 免費開始。

See what ATS software sees Your resume looks different to a machine. Free check — PDF, DOCX, or DOC.
Check My Resume

Tags

environmental engineer 履歷範例
Blake Crosley — Former VP of Design at ZipRecruiter, Founder of ResumeGeni

About Blake Crosley

Blake Crosley spent 12 years at ZipRecruiter, rising from Design Engineer to VP of Design. He designed interfaces used by 110M+ job seekers and built systems processing 7M+ resumes monthly. He founded ResumeGeni to help candidates communicate their value clearly.

12 Years at ZipRecruiter VP of Design 110M+ Job Seekers Served

Ready to build your resume?

Create an ATS-optimized resume that gets you hired.

Get Started Free