電氣工程師履歷 ATS 最佳化檢查清單

電氣工程師在 2024 年擁有 192,000 個職位，預計到 2034 年每年有 17,500 個空缺，美國勞工統計局預計十年內就業成長 7%——高於所有職業的平均水準 [1]。半導體、再生能源、電力配送和電動車基礎設施領域的需求激增，然而 88% 的雇主報告稱合格候選人因履歷缺乏 ATS 友善的格式和術語而被 ATS（申請人追蹤系統）篩除 [5]。年薪中位數為 111,910 美元，半導體製造和聯邦國防合約中前 10% 的年薪超過 175,460 美元 [1][2]。如果您是一名競爭這些職位的電氣工程師，您的履歷需要在任何人閱讀之前通過自動解析——這意味著準確了解 ATS 平台如何評估您的資質、關鍵字和檔案結構。

本清單涵蓋每個子專業——電力系統、控制、電路設計、嵌入式系統、電信——提供讓電氣工程履歷獲得排名和審閱的特定關鍵字、格式規則和最佳化策略。

重點摘要

• PE/FE/EIT 資質是二元 ATS 篩選器。 招聘人員在審核其他資質之前搜尋「PE」和「EIT」作為精確匹配字串。將這些放在您的姓名標題、證書部分和「Professional Summary」中，以確保在所有欄位中都能被解析。
• 工具特定關鍵字優於通用軟體引用。 「Altium Designer」和「PCB design software」是不同的 ATS 匹配。「Allen-Bradley ControlLogix」和「PLC programming」觸發不同的搜尋。始終列出職位發布中使用的確切產品名稱。
• 量化的專案成果是唯一能在解析中存活的差異化因素。 電壓等級（480V、13.8kV、230kV）、成本節約（減少 120 萬美元材料成本）、效率提升（功率因數改善 18%）和合規指標（14 次檢查零 NEC 違規）都以可搜尋文字形式傳遞。
• 電氣工程子專業有不同的關鍵字詞彙。 電力系統工程師的履歷和電路設計工程師的履歷共享的 ATS 關鍵字比大多數候選人預期的要少。精確定位您的子專業。
• 格式錯誤導致無聲拒絕。 表格、文字方塊、雙欄版面和頁首/頁尾內容導致 ATS 解析器混淆欄位分配——將您的雇主名稱合併到技能部分，或完全遺失您的 PE 執照。

ATS 系統如何篩選電氣工程師履歷

工程雇主使用的 ATS 系統——Workday、Taleo、iCIMS、Greenhouse、Lever——分三個階段處理您的履歷，任何階段的失敗都意味著招聘人員永遠看不到您的申請 [5][8]。

階段一：解析。 ATS 從您的檔案中提取文字並將其分配到結構化欄位：姓名、聯絡資訊、工作歷史、教育、技能、證書。如果您的格式使用表格、文字方塊或多欄版面，解析器會將內容分配到錯誤的欄位或完全丟棄。放在頁首/頁尾中的 PE 資質可能從解析輸出中消失。

階段二：關鍵字比對。 系統將提取的文字與職位要求進行比較。它搜尋精確字串——「ETAP」、「NEC compliance」、「Arc Flash Analysis」、「SCADA」、「Allen-Bradley」。部分匹配因平台而異：一些將「AutoCAD Electrical」視為「AutoCAD」的匹配，其他則要求精確字串。使用通用術語而非特定工具名稱的候選人得分較低。

階段三：排名。 履歷根據關鍵字密度、資質匹配和工作年資解析進行評分和排名。招聘人員通常從可能超過 200 份申請的池中審核前 10-25 名候選人。您的履歷需要排在前列才能獲得人類關注。

實際含義：您的履歷不是一份要被閱讀的檔案——它是一個要被解析、匹配和排名的資料集。每一個格式決定和關鍵字選擇要麼幫助要麼妨礙這個過程。

電氣工程師關鍵 ATS 關鍵字

以下關鍵字來源於 O*NET 對 SOC 17-2071 的任務描述、IEEE 能力框架、NCEES PE 考試內容規範，以及對當前電氣工程職位發布的分析 [3][4][6]。在履歷上按類別組織它們，而不是以平面列表形式排列。

電路設計與 PCB

Altium Designer, OrCAD, KiCad, Eagle, Cadence Allegro, PCB layout, schematic capture, high-speed digital design, signal integrity, EMI/EMC compliance, impedance matching, 4-layer PCB, 6-layer PCB, multilayer board design, DFM (Design for Manufacturability), DFT (Design for Testability), BOM management, Gerber files, component selection

電力系統與配電

Power systems analysis, ETAP, SKM PowerTools, load flow analysis, short circuit analysis, arc flash analysis, protective relay coordination, power factor correction, transformer sizing, switchgear, motor control center (MCC), variable frequency drive (VFD), uninterruptible power supply (UPS), medium voltage (4.16kV, 13.8kV), low voltage (480V, 208V), NEC load calculations, demand analysis, single-line diagrams, power distribution unit (PDU)

控制與自動化

PLC programming, Allen-Bradley ControlLogix, Allen-Bradley CompactLogix, Siemens S7, Ladder Logic, Structured Text, Function Block Diagram, SCADA systems, HMI design, Wonderware, FactoryTalk, Ignition, DCS (Distributed Control System), process instrumentation, P&ID review, loop tuning, control panel design, motor starter circuits, VFD commissioning

軟體與模擬工具

MATLAB, Simulink, SPICE (LTspice, PSpice), AutoCAD Electrical, ETAP, Revit MEP, Python, LabVIEW, MathCAD, Multisim, ANSYS Maxwell, COMSOL, PSCAD, DIgSILENT PowerFactory, EasyPower

標準與合規

NEC (National Electrical Code), NFPA 70, NFPA 70E, IEEE standards, IEEE 1584 (Arc Flash), IEEE 519 (Harmonics), UL listing, IEC standards, NESC (National Electrical Safety Code), OSHA electrical safety, ANSI standards, API electrical classifications, Class I Division 1/Division 2 (hazardous locations), ATEX, NETA testing standards

證書與資質

Professional Engineer (PE), Engineer in Training (EIT), Fundamentals of Engineering (FE), Certified Energy Manager (CEM), LEED AP, PMP, NETA Certified Electrical Testing Technician, OSHA 30-Hour, Six Sigma Green Belt, Certified Automation Professional (CAP)

履歷格式要求

ATS 解析器按順序閱讀檔案——從左到右、從上到下——並根據章節標題識別將內容分配到欄位 [5]。電氣工程履歷必須遵守以下格式規則才能正確解析。

檔案格式

除非發布明確要求 PDF，否則提交 .docx。Word 檔案在所有主要 ATS 平台上解析更可靠。如果需要 PDF，從 Word 匯出而不是在圖形工具中設計——這保留了 ATS 提取關鍵字所需的底層文字層。

版面結構

• 僅限單欄。 雙欄版面導致 ATS 交叉排列左右內容，產生亂碼輸出。
• 無表格、文字方塊或圖形。 ATS 以不可預測的順序讀取表格儲存格或完全跳過它們。
• 關鍵內容不要放在頁首或頁尾中。 您的姓名、PE 資質和聯絡資訊屬於檔案正文。
• 標準章節標題。 準確使用：「Professional Summary」、「Experience」或「Professional Experience」、「Education」、「Skills」或「Technical Skills」、「Certifications」、「Projects」（選用）。

字體和間距

使用 10-12pt 的標準字體（Calibri、Arial、Times New Roman、Garamond）。最小 0.5 英吋邊距。僅對章節標題和職位名稱使用粗體；避免對關鍵字使用斜體。

姓名和資質標題

在檔案正文的第一行格式化您的姓名和資質：

JAMES PARK, PE, CEM
Electrical Engineer | Power Systems & Distribution
[email protected] | (555) 345-6789 | linkedin.com/in/jamesparkpe

這確保 ATS 在姓名欄位中擷取您的 PE 稱號，在標題欄位中擷取您的子專業。在姓名後和證書部分中都包含「PE」建立了冗餘，無論 ATS 讀取哪個欄位都能保證解析。

工作經驗最佳化

電氣工程成就在包含系統規格、專案規模、量化成果和標準合規性時變得具有 ATS 競爭力。像「designed electrical systems」這樣的通用描述不包含可搜尋的差異化因素。

要點公式

[動作動詞] + [系統/交付物] + [工具/標準] + [規模指標] + [成果/影響]

入門級範例（0-4 年，EIT/FE）

• Designed branch circuit layouts and panel schedules for 3 commercial buildings totaling 85,000 sq ft using AutoCAD Electrical, maintaining NEC Article 220 load calculation compliance and achieving 100% first-review approval from the Authority Having Jurisdiction
• Programmed Allen-Bradley CompactLogix PLC using Ladder Logic for automated conveyor sorting system, reducing manual sorting errors by 34% and increasing throughput from 1,200 to 1,600 units per shift
• Performed arc flash analysis on 480V distribution system using ETAP for 6-building industrial campus, generating IEEE 1584-compliant labels for 42 panels and reducing incident energy levels at 8 locations through protective device coordination adjustments
• Conducted power quality monitoring across 3 manufacturing facilities using Fluke 1760 analyzers, identifying harmonic distortion exceeding IEEE 519 limits and recommending passive filter installation that reduced THD from 12% to 4.2%
• Created 150+ electrical construction drawings including single-line diagrams, riser diagrams, and lighting plans for $4.2M hospital renovation, incorporating NEC Article 517 healthcare facility requirements and maintaining 96% first-submission approval rate

中級範例（5-10 年，PE）

• Led electrical design for $35M data center expansion including 4MW of redundant UPS capacity, N+1 generator configuration, and 2N power distribution architecture, delivering construction documents 3 weeks ahead of schedule with zero RFIs during bidding
• Managed protective relay coordination study for 138kV/13.8kV substation serving municipal utility, programming 28 SEL relays and reducing fault clearing time from 15 cycles to 5 cycles while maintaining IEEE C37.112 coordination margins
• Directed arc flash hazard mitigation program across 12 industrial facilities, performing ETAP short circuit and coordination studies on 3,200 devices, reducing maximum incident energy from 42 cal/cm2 to 8 cal/cm2 through bus differential protection and zone-selective interlocking
• Designed SCADA system upgrade for 22-station wastewater collection network using Ignition platform, integrating 340 I/O points with existing Allen-Bradley ControlLogix PLCs and reducing operator response time to alarm conditions by 62%
• Performed load flow and voltage drop analysis for 15-mile 34.5kV distribution feeder using ETAP, identifying 3 voltage regulation deficiencies and specifying capacitor bank installations that improved power factor from 0.84 to 0.97, saving the utility $180K annually in reactive power penalties

高級範例（10+ 年，PE，專案經理）

• Directed $120M electrical infrastructure program for semiconductor fabrication facility, managing 18-person multidisciplinary team across power distribution (60MVA service), grounding, lightning protection, and cleanroom ESD control systems — delivering the project within 2% of budget
• Established company-wide electrical design standards and QA/QC protocols for 65-engineer firm, reducing construction change orders attributable to electrical design errors by 38% across $400M annual project portfolio
• Negotiated $8.5M professional services contract with investor-owned utility for system-wide protective relay modernization covering 14 substations, transitioning from electromechanical to microprocessor-based relays and achieving zero misoperations during 24-month construction phase
• Led feasibility study and detailed design for 50MW solar photovoltaic facility including medium-voltage collector system, 230kV interconnection, and SCADA integration, securing state Public Utilities Commission approval and utility interconnection agreement
• Managed commissioning and startup of 230kV gas-insulated switchgear (GIS) substation for regional transmission operator, coordinating 40-person field team through 6-month testing protocol and achieving energization on scheduled date with zero safety incidents

「Skills」章節策略

「Skills」章節有雙重目的：為 ATS 匹配提供關鍵字密度，為人類審閱者提供快速瀏覽參考。為兩者進行結構化。

推薦格式

將技能分為 3-4 個子標題下的組，而不是列在單個區塊中。這改善了 ATS 解析（清晰的分類）和人類可讀性。

Design & Analysis Software: AutoCAD Electrical, ETAP, Altium Designer, Revit MEP, MATLAB/Simulink, LTspice, SKM PowerTools, MathCAD

Controls & Automation: Allen-Bradley ControlLogix/CompactLogix, Siemens S7, Ladder Logic, Structured Text, SCADA (Ignition, Wonderware), HMI Design, FactoryTalk

Power Systems: Load flow analysis, short circuit analysis, arc flash studies (IEEE 1584), protective relay coordination, power factor correction, harmonic analysis (IEEE 519), demand analysis, single-line diagrams

Standards & Codes: NEC (NFPA 70), NFPA 70E, IEEE C37, IEEE 1584, IEEE 519, NESC, UL listing, IEC 61131-3, OSHA electrical safety, Class I Div 1/Div 2

與職位發布保持一致

提交前閱讀特定的職位發布。如果發布說「Allen-Bradley ControlLogix」，不要只寫「PLC programming」——即使 ControlLogix 是 PLC，ATS 執行的是字串匹配而非概念匹配。精確匹配他們的詞彙。

證書作為關鍵字

首次出現時列出證書的縮寫和全稱：

• Professional Engineer (PE) — [State], License #12345
• Fundamentals of Engineering (FE) — Passed 2022
• Certified Energy Manager (CEM) — Association of Energy Engineers
• NETA Certified Electrical Testing Technician — Level III
• OSHA 30-Hour Construction Safety

電氣工程師常犯的 ATS 錯誤

1. 僅在姓名後列出「PE」

在姓名行寫「PE」而不在證書部分也列出它，意味著 ATS 可能不會將其對應到資質欄位。在您的姓名、「Professional Summary」和證書部分都列出 PE——三重冗餘保證至少一個欄位能擷取它。PE 電氣和電腦考試的通過率約為 49%，使該資質成為值得強調的真正差異化因素 [7]。

2. 使用通用電壓引用

寫「designed electrical systems」包含零可搜尋規格。「Designed 480V, 3-phase power distribution system with 2,000A main switchboard」包含電壓等級、配置和設備類型——都是可搜尋的 ATS 術語。在每個相關要點中指定電壓等級。

3. 縮寫標準而不給出全稱

寫「per IEEE standards」對 ATS 幾乎毫無價值。「Per IEEE 1584 arc flash hazard calculations and IEEE 519 harmonic distortion limits」提供了兩個特定的可搜尋標準編號。

4. 遺漏 PLC 平台名稱

「PLC programming experience」是一個類別，不是關鍵字。招聘人員搜尋「Allen-Bradley」、「ControlLogix」、「Siemens S7」或「CompactLogix」——實際的硬體平台。

5. 使用圖形表示軟體熟練度

條形圖、星級評定和進度圓圈顯示「ETAP: 85%」對 ATS 不可見。系統從嵌入圖形中提取零文字。用文字替換視覺熟練度指標。

6. 混淆電氣工程和電子工程

ATS 將「Electrical Engineer」和「Electronics Engineer」視為不同的職業搜尋（SOC 17-2071 vs. 17-2072）。如果您申請電氣工程角色，請確保您的履歷標題、摘要和經驗始終使用「Electrical Engineer」[3]。

7. 埋沒危險區域經驗

如果您有 Class I Division 1/Division 2 電氣分類、NEC Article 500/505 或 ATEX 認證設備的經驗，請使其突出。這些是石油天然氣、化工、製藥和採礦雇主的高價值 ATS 關鍵字。

ATS 友善的「Professional Summary」範例

範例一：電力系統工程師（職業中期，PE）

Professional Engineer (PE) with 8 years of experience in power systems design and analysis, specializing in medium-voltage distribution (4.16kV-34.5kV), protective relay coordination, and arc flash hazard mitigation. Proficient in ETAP, SKM PowerTools, and AutoCAD Electrical with demonstrated ability to deliver $5M-$40M electrical infrastructure projects from conceptual design through construction administration and commissioning. Performed IEEE 1584 arc flash studies and NEC compliance reviews across 200+ industrial and commercial facilities. Led engineering teams of up to 8 on utility substation, data center, and manufacturing facility projects while maintaining schedules within 5% variance.

範例二：控制工程師（早期職業，EIT）

Electrical Engineer in Training (EIT) with 3 years of experience in controls and automation engineering, specializing in PLC programming, SCADA system design, and industrial process instrumentation. Skilled in Allen-Bradley ControlLogix and CompactLogix platforms using Ladder Logic and Structured Text, with hands-on commissioning experience across food & beverage, pharmaceutical, and water/wastewater facilities. Designed HMI interfaces using FactoryTalk View and Ignition, integrating 500+ I/O points across 4 facility-wide automation projects. FE exam passed; pursuing PE licensure with projected eligibility in 2028.

範例三：高級電氣工程師（PE，專案經理）

Licensed Professional Engineer (PE) with 16 years of progressive experience in electrical engineering, managing $10M-$120M projects including semiconductor fabrication facilities, utility-scale solar installations, and critical power infrastructure for data centers and healthcare facilities. Expert in ETAP, AutoCAD Electrical, and Revit MEP with deep knowledge of NEC, NFPA 70E, IEEE 1584, and NESC requirements across low-voltage, medium-voltage, and high-voltage systems. Proven track record directing multidisciplinary teams of 15+ engineers, negotiating professional services contracts, and delivering projects for utility, industrial, and institutional clients with a 97% on-time completion rate. Certified Energy Manager (CEM) with 12 completed energy audits identifying cumulative savings exceeding $4.2M annually.

電氣工程履歷動作動詞

設計與分析

Designed, Engineered, Modeled, Simulated, Calculated, Analyzed, Specified, Sized, Dimensioned, Evaluated

實施與施工

Installed, Commissioned, Calibrated, Programmed, Configured, Integrated, Tested, Validated, Troubleshot, Debugged

專案領導

Directed, Managed, Coordinated, Supervised, Led, Oversaw, Mentored, Delegated, Negotiated, Contracted

技術溝通

Documented, Prepared, Authored, Presented, Reviewed, Approved, Submitted, Reported, Specified, Drafted

流程改進

Optimized, Reduced, Improved, Upgraded, Modernized, Streamlined, Automated, Enhanced, Standardized, Consolidated

ATS 評分清單

檔案結構

• [ ] 檔案儲存為 .docx（除非明確要求 PDF）
• [ ] 單欄版面，無表格、文字方塊或圖形
• [ ] 姓名和資質在檔案正文中，不在頁首/頁尾中
• [ ] 標準章節標題（「Professional Summary」、「Experience」、「Education」、「Skills」、「Certifications」）
• [ ] 10-12pt 標準字體（Calibri、Arial、Times New Roman）
• [ ] 所有邊最小 0.5 英吋邊距

資質與證書

• [ ] PE/EIT/FE 列在姓名行、「Professional Summary」和證書部分
• [ ] 完整的資質名稱與縮寫配對（Professional Engineer (PE)）
• [ ] PE 包含執照號和州
• [ ] 所有相關證書列出頒發機構

關鍵字覆蓋

• [ ] 發布中的職位名稱出現在您的履歷標題和摘要中
• [ ] 特定軟體工具與發布術語精確匹配
• [ ] 經驗要點中包含電壓等級和系統規格
• [ ] 產業特定標準按編號引用（IEEE 1584，不是「IEEE standards」）
• [ ] PLC/控制平台名稱已指定（Allen-Bradley ControlLogix，不僅僅是「PLC」）

經驗部分

• [ ] 每個要點遵循公式：動作動詞 + 系統 + 工具/標準 + 指標 + 成果
• [ ] 每個職位最少 3 個帶量化成就的要點
• [ ] 大多數要點中包含美元值、百分比、數量和電壓等級
• [ ] 沒有要點以「Responsible for」或「Duties included」開頭

「Skills」章節

• [ ] 技能按 3-4 個類別子標題組織
• [ ] 軟體工具列出特定版本/產品（AutoCAD Electrical，不是 AutoCAD）
• [ ] 技能與目標職位發布的確切術語匹配
• [ ] 無熟練度條形圖、圖表或圖形指標

常見問題

我應該取得 PE 執照以提高履歷的 ATS 表現嗎？

PE 執照是電氣工程 ATS 篩選中價值最高的單一資質。公用事業、工程顧問公司和政府機構的招聘人員經常使用「PE」作為強制篩選條件——沒有它的履歷會自動被排除在考慮範圍之外。BLS 報告執照對入門級職位不是必需的，但蓋章圖紙、領導專案或向公眾提供服務的經驗豐富的工程師需要它 [1]。PE 電氣和電腦考試的總體通過率約為 49% [7]。如果您已通過 FE 考試並持有 EIT 身份，請使其突出。如果您有資格參加 PE 考試，參加並通過它是您能為履歷競爭力做的最有影響力的事情。

如何處理跨多個電氣工程子專業的經驗？

根據特定發布客製化您的履歷，而不是建立一份萬能檔案。一份同時列出電力系統、控制、電路設計和電信關鍵字的履歷會稀釋您在任何單個職位上的相關性分數。如果您有真正的跨學科經驗，請在摘要和領先經驗要點中強調與發布匹配的學科，然後將次要學科作為支援上下文。ATS 根據與發布相關的關鍵字密度對履歷進行排名 [3][5]。保留一份包含所有經驗的主履歷，然後為每次申請建立學科特定版本。

哪些電氣工程軟體工具被招聘人員搜尋最多？

根據職位發布分析，最常搜尋的工具因子專業而異。電力系統：ETAP、SKM PowerTools、AutoCAD Electrical 和 Revit MEP。控制：Allen-Bradley Studio 5000/RSLogix、Siemens TIA Portal、Wonderware/Ignition 和 FactoryTalk。電路設計：Altium Designer、OrCAD、Cadence Allegro 和 LTspice。分析：MATLAB/Simulink、PSCAD 和 DIgSILENT PowerFactory [3][6]。

ATS 會懲罰超過一頁的履歷嗎？

ATS 不會懲罰長度。系統對所有頁面的關鍵字匹配和排名同等解析。然而，接收 ATS 篩選履歷的人類審閱者確實有長度期望。少於 5 年經驗的候選人一頁。有 5-10 年經驗的持照 PE 兩頁。有 15+ 年經驗的高級工程師兩到三頁 [1][2]。

如何列出涉及機密或專有工作的電氣工程專案？

您可以描述技術範圍和您的角色，而不會洩露機密詳情或專有資訊。專注於系統規格、使用的工具、應用的標準和量化成果，同時省略客戶名稱和專案特定的識別細節。用通用描述替換客戶名稱：「government defense facility」、「classified aerospace program」或「Fortune 100 semiconductor manufacturer」。

引用：

[1] Bureau of Labor Statistics, "Electrical and Electronics Engineers," Occupational Outlook Handbook, https://www.bls.gov/ooh/architecture-and-engineering/electrical-and-electronics-engineers.htm

[2] Bureau of Labor Statistics, "Occupational Employment and Wages, May 2024 — 17-2071 Electrical Engineers," https://www.bls.gov/oes/current/oes172071.htm

[3] O*NET OnLine, "17-2071.00 — Electrical Engineers," https://www.onetonline.org/link/summary/17-2071.00

[4] IEEE — Institute of Electrical and Electronics Engineers, https://www.ieee.org/

[5] Select Software Reviews, "Applicant Tracking System Statistics (Updated for 2026)," https://www.selectsoftwarereviews.com/blog/applicant-tracking-system-statistics

[6] ResumeAdapter, "Electrical Engineer Resume Keywords (2026)," https://www.resumeadapter.com/blog/electrical-engineer-resume-keywords

[7] NCEES, "PE Exam — Electrical and Computer," https://ncees.org/exams/pe-exam/electrical-and-computer/

[8] NSPE, "What is a PE?," https://www.nspe.org/resources/licensure/what-pe

{"meta_description":"ATS checklist for electrical engineer resumes. PE license formatting, ETAP/PLC keywords, power systems metrics, NEC terms, and ATS format rules.","opening_hook":"Electrical engineers held 192,000 jobs in 2024 with 17,500 openings projected annually through 2034 and 7% growth — faster than average — yet 88% of employers report losing qualified candidates to ATS screening failures.","key_takeaways":["PE/FE/EIT credentials are binary ATS filters — place in name header, certifications section, and professional summary","Tool-specific keywords beat generic references: 'Altium Designer' and 'PCB design software' are different ATS matches","Quantified project outcomes with voltage levels, cost savings, and compliance metrics differentiate resumes in ATS rankings","Electrical engineering sub-disciplines (power, controls, circuit design) have distinct keyword vocabularies — target precisely","Tables, text boxes, and two-column layouts cause ATS parsers to scramble or drop content silently"],"citations":[{"number":1,"title":"Electrical and Electronics Engineers - Occupational Outlook Handbook","url":"https://www.bls.gov/ooh/architecture-and-engineering/electrical-and-electronics-engineers.htm","publisher":"Bureau of Labor Statistics"},{"number":2,"title":"Occupational Employment and Wages - 17-2071 Electrical Engineers","url":"https://www.bls.gov/oes/current/oes172071.htm","publisher":"Bureau of Labor Statistics"},{"number":3,"title":"17-2071.00 - Electrical Engineers","url":"https://www.onetonline.org/link/summary/17-2071.00","publisher":"O*NET OnLine"},{"number":4,"title":"Institute of Electrical and Electronics Engineers","url":"https://www.ieee.org/","publisher":"IEEE"},{"number":5,"title":"Applicant Tracking System Statistics","url":"https://www.selectsoftwarereviews.com/blog/applicant-tracking-system-statistics","publisher":"Select Software Reviews"},{"number":6,"title":"Electrical Engineer Resume Keywords (2026)","url":"https://www.resumeadapter.com/blog/electrical-engineer-resume-keywords","publisher":"ResumeAdapter"},{"number":7,"title":"PE Exam - Electrical and Computer","url":"https://ncees.org/exams/pe-exam/electrical-and-computer/","publisher":"NCEES"},{"number":8,"title":"What is a PE?","url":"https://www.nspe.org/resources/licensure/what-pe","publisher":"NSPE"}],"prompt_version":"v2.0-cli","word_count":3650}