Electrician ATS Optimization Checklist: Get Your Resume Past the Filter and Onto the Foreman's Desk

Electrician ATS Optimization Checklist: Get Your Resume Past the Filter and Onto the Foreman's Desk

The Bureau of Labor Statistics counts 818,700 electricians employed in the U.S. as of 2024, with 81,000 openings projected annually through 2034 — a 9% growth rate that the BLS classifies as "much faster than the average for all occupations" ¹. Factor in the $7.5 billion the Infrastructure Investment and Jobs Act directs toward EV charging infrastructure alone ², and demand for licensed electricians is entering territory the industry has not seen in decades. But here is the problem: electrical contractors and staffing agencies now funnel applications through Applicant Tracking Systems, and if your resume says "wiring work" instead of "NEC-compliant electrical installation," you never make it to the interview — even if you have pulled wire on a hundred commercial jobs. This checklist shows you exactly how to structure, keyword-optimize, and format your electrician resume so the ATS ranks you at the top.

Key Takeaways

• Mirror the job posting's exact language. ATS platforms match your resume against keywords pulled from the posting. If it says "conduit bending," your resume must say "conduit bending" — not "bending pipe" or "running conduit."
• Submit a single-column .docx file. Tables, text boxes, graphics, and multi-column layouts break ATS parsing. A clean Word document parses correctly across Workday, iCIMS, Team Engine, and every other system contractors use.
• Quantify every bullet with electrical-specific metrics. Panel sizes in amps, conduit runs in feet, circuits installed per project, cost savings in dollars — numbers tell the ATS and the hiring manager that you do real work, not "various electrical tasks."
• List every license and certification by its full official name. Write "Journeyman Electrician License — State of Texas" and "OSHA 30-Hour Construction Safety," not abbreviations the parser cannot match.
• Build a Skills section with 20-30 hard skills organized by category. The ATS treats your Skills section as a keyword index. Group terms by Electrical Systems, Codes & Standards, Tools & Equipment, Safety, and Certifications.

How ATS Systems Screen Electrician Resumes

An Applicant Tracking System is software that receives, stores, parses, and ranks every application an employer collects. In 2025, 97.8% of Fortune 500 companies use an ATS, and adoption among electrical contractors has accelerated as construction-specific platforms like Team Engine, Buildertrend, and Lever have expanded into skilled trades hiring ³.

Here is what happens when you submit an electrician resume through an online portal:

1. Parsing. The ATS extracts text from your file and maps it into structured fields: name, contact information, work history, education, skills, certifications. If your formatting uses tables, text boxes, headers/footers, or embedded images, the parser misroutes your data — your license number ends up in the education field, your work history disappears, or your skills section reads as a single unformatted block.
2. Keyword matching. The recruiter or hiring manager has entered required and preferred keywords from the job description. The ATS compares your resume text against those keywords and produces a match score. For electricians, keywords include systems ("three-phase power distribution"), codes ("NEC 2023"), tools ("Fluke 87V multimeter"), and credentials ("Journeyman Electrician License").
3. Ranking. Resumes are sorted by match score. Recruiters typically review the top 10-25 candidates first. If your resume scores low because it is missing terms that are clearly in the posting, you fall to the bottom — regardless of your 8,000 hours of apprenticeship experience.
4. Human review. Despite the widely circulated claim that ATS systems "auto-reject" 75% of resumes, research from Enhancv found that 92% of recruiters confirm their ATS does not automatically reject applications based on formatting or content ⁴. The real problem is prioritization: when 150 electricians apply for one commercial wiring position, the recruiter starts at the top of the ranked list and stops calling when the interview slate is full.

Electricians face a unique hiring dynamic. Many jobs still come through union halls, IBEW dispatch, word-of-mouth referrals, or walk-on hires from the job trailer. But when you apply to a national electrical contractor, a facilities management company, a data center operator, or a renewable energy installer through an online portal, you are going through an ATS. Every online application is an ATS submission — treat it accordingly.

Critical ATS Keywords for Electricians

The following keywords are drawn from O*NET occupation data for SOC 47-2111.00 ⁵, BLS occupational profiles ¹, NFPA standards ⁶, and direct review of electrician job postings on Indeed, LinkedIn, and IBEW job boards. Organize them by category in your resume:

Electrical Systems & Installation

• Electrical installation
• Commercial wiring
• Residential wiring
• Industrial wiring
• Three-phase power distribution
• Single-phase systems
• Branch circuit installation
• Panel board installation / load center
• Switchgear
• Motor control centers (MCC)
• Transformer installation
• Service entrance / service upgrade
• Receptacle and switch installation
• Lighting installation / lighting controls
• Low-voltage systems
• Fire alarm systems
• Voice/data cabling (Cat5e, Cat6, fiber optic)
• EV charging station installation (EVSE)
• Solar PV wiring / photovoltaic systems
• Generator installation / transfer switches

Codes, Standards & Compliance

• National Electrical Code (NEC)
• NEC 2023 / NEC 2026
• NFPA 70E (Standard for Electrical Safety in the Workplace)
• OSHA 29 CFR 1926 Subpart K (Electrical — Construction)
• Local building codes
• Electrical plan review
• Code compliance inspection
• Permit acquisition
• Arc flash analysis
• Ground fault protection
• GFCI / AFCI requirements

Tools & Equipment

• Multimeter (Fluke, Klein)
• Megohmmeter / Megger (insulation resistance tester)
• Clamp meter / amp probe
• Non-contact voltage tester (NCVT)
• Oscilloscope
• Wire pulling equipment / fish tape
• Conduit bender (hand bender, hydraulic bender, Chicago bender)
• EMT conduit / rigid conduit / PVC conduit
• Knockout punch
• Cable tray
• Crimping tools
• Wire strippers
• Lineman's pliers
• Channel locks
• Rotary hammer drill
• Hole saw kit
• Torque wrench (for lug terminations)

Safety & Compliance

• OSHA 10-Hour Construction Safety
• OSHA 30-Hour Construction Safety
• Lockout/Tagout (LOTO) procedures
• Arc flash protection / PPE categories
• Energized work permits
• Confined space entry
• Fall protection
• Trenching and excavation safety
• Job Hazard Analysis (JHA)
• Toolbox talks / safety briefings
• First Aid / CPR / AED

Certifications & Licenses

• Journeyman Electrician License
• Master Electrician License
• Electrical Contractor License
• IBEW Journeyman Wireman
• NCCER Electrical (Levels 1-4)
• EPA Section 608 Certification
• NABCEP PV Installation Professional (solar)
• EVITP (Electric Vehicle Infrastructure Training Program)
• State-specific electrical license (specify your state)

Use the exact phrasing from the job posting whenever possible. If the posting says "conduit bending and installation," write "conduit bending and installation" — not "bending pipe" or "running conduit." ATS platforms are literal pattern matchers.

Resume Format Requirements

ATS parsers are engineered for simplicity. Follow these formatting rules to prevent parsing failures:

File format: Submit as .docx (Microsoft Word) unless the job posting explicitly requests PDF. Word files parse more reliably across all major ATS platforms. If you must submit PDF, ensure it is a text-based PDF generated from Word — not a scanned image or a Canva export.

Layout: Single column only. No tables, no text boxes, no side-by-side columns, no graphics, no icons. The ATS reads left-to-right, top-to-bottom. Anything that disrupts that linear flow causes data to land in wrong fields or disappear entirely.

Fonts: Use standard fonts: Arial, Calibri, Times New Roman, or Helvetica. Size 10-12pt for body text, 13-14pt for section headers. Avoid decorative, condensed, or script fonts.

Section headings: Use standard names the ATS recognizes: - Professional Summary (not "About Me" or "Profile") - Work Experience (not "Career History" or "Employment Record") - Skills (not "Core Competencies" or "Areas of Expertise") - Licenses & Certifications (not "Credentials" or "Training") - Education (not "Academic Background") - Contact Information (at the top, not in a header/footer)

Contact information placement: Put your name, phone number, email, city/state, and license number at the very top of the document in regular body text. Do NOT place contact information in the document header or footer — many ATS platforms cannot read header/footer content.

Dates: Use a consistent format: "Jan 2021 - Present" or "01/2021 - Present." Avoid using only years ("2021 - 2025") because some ATS platforms calculate experience duration from month-level data, and year-only entries undercount your hours.

File name: Name your file FirstName-LastName-Electrician-Resume.docx. Some ATS platforms display the file name to the recruiter. A clear name beats "resume_updated_final2.docx."

Work Experience Optimization

Your work experience section carries the heaviest keyword weight. Each bullet should open with a strong action verb and include at least one measurable result. Here are 15 before-and-after examples:

Before: Installed wiring in buildings. After: Installed branch circuit wiring for a 240-unit apartment complex, running 12/2 and 14/2 Romex through 1,200+ feet of attic and wall cavities per building, completing rough-in on each 3-story structure in 9 days.

Before: Worked on electrical panels. After: Wired and terminated 42 residential load centers (100A-400A), including main breaker installation, branch circuit labeling, and final inspection pass rates of 98% on first submission.

Before: Did commercial electrical work. After: Pulled 350 MCM copper feeders through 400 feet of rigid conduit for a 2,000A service entrance on a 6-story office building, coordinating wire pulls with a 4-person crew.

Before: Bent conduit on job sites. After: Fabricated and installed 3,200 linear feet of 3/4" and 1" EMT conduit with offsets, back-to-back bends, and saddle bends for a hospital surgical wing expansion, maintaining NEC fill ratio compliance.

Before: Troubleshot electrical problems. After: Diagnosed and repaired ground faults, open circuits, and overloaded branch circuits across a 150,000 sq ft manufacturing facility, reducing unplanned downtime by 35% over 6 months.

Before: Installed lighting fixtures. After: Installed 800+ LED troffer fixtures, emergency egress lighting, and occupancy sensors across 3 floors of a corporate office, completing the project 4 days ahead of schedule.

Before: Ran wire and cable. After: Pulled and terminated 15,000 feet of Cat6 data cable and 25 multi-mode fiber optic runs for a new data center, passing 100% of Fluke certification tests on initial sweep.

Before: Worked on motor controls. After: Installed and wired 12 motor control centers (MCC), VFDs, and starters for HVAC and process equipment in a pharmaceutical manufacturing plant, performing point-to-point verification on all 480V circuits.

Before: Helped with fire alarm systems. After: Installed initiating devices, notification appliances, and control panels for a 75-zone Edwards EST fire alarm system in a 200,000 sq ft warehouse, passing fire marshal inspection on first walk-through.

Before: Maintained electrical systems. After: Performed scheduled preventive maintenance on 500+ motors, transformers, switchgear, and panelboards across 3 industrial facilities, completing thermographic scanning and megger testing on all high-voltage equipment quarterly.

Before: Supervised other electricians. After: Led a crew of 8 journeymen and 4 apprentices on a $12M hospital renovation, coordinating rough-in, trim-out, and final connection phases across 14 months with zero lost-time safety incidents.

Before: Installed solar panels. After: Wired 340 residential solar PV systems (5kW-15kW), including roof-mount array connections, DC/AC inverter installation, and utility interconnection, achieving 100% AHJ inspection pass rates.

Before: Did EV charger installations. After: Installed 85 Level 2 (240V/40A) and 12 DC Fast Charger (480V) EV charging stations at commercial properties and multifamily complexes, including dedicated circuit runs, GFCI protection, and load calculations per NEC Article 625.

Before: Read blueprints and diagrams. After: Interpreted single-line diagrams, riser diagrams, and panel schedules for commercial electrical installations valued at $500K-$8M, coordinating with architects, mechanical engineers, and general contractors on RFIs and change orders.

Before: Kept work area safe. After: Enforced OSHA 29 CFR 1926 Subpart K electrical safety standards, NFPA 70E arc flash protection protocols, and daily lockout/tagout procedures across all energized work, maintaining zero OSHA recordable incidents over 22,000 field hours.

Notice the pattern: every "after" bullet names the specific system or task, quantifies the scope (amps, feet, units, dollar values, crew sizes, time frames), and uses exact terminology that matches ATS keywords.

Skills Section Strategy

Your Skills section functions as a keyword index. ATS platforms scan it independently of your work history. Structure it in grouped clusters:

Electrical Systems: Branch Circuit Wiring | Three-Phase Power Distribution | Panel Board Installation | Service Entrance/Upgrade | Switchgear | Motor Control Centers | Transformer Installation | Lighting Controls | Low-Voltage Systems | Fire Alarm Systems | Solar PV Wiring | EV Charging Infrastructure

Codes & Standards: NEC 2023 | NEC 2026 | NFPA 70E | OSHA 29 CFR 1926 Subpart K | Local Building Codes | Arc Flash Analysis | Electrical Plan Review | Code Compliance Inspection

Tools & Test Equipment: Fluke Multimeter | Megohmmeter | Clamp Meter | Non-Contact Voltage Tester | Oscilloscope | Wire Pulling Equipment | Hand Conduit Bender | Hydraulic Bender | Knockout Punch | Torque Wrench | Crimping Tools | Rotary Hammer

Safety: Lockout/Tagout (LOTO) | Arc Flash Protection | Energized Work Permits | Fall Protection | Confined Space Entry | Job Hazard Analysis | OSHA Compliance

Software & Technology: Accubid Estimating | Bluebeam Revu | Procore | AutoCAD Electrical | PlanGrid/Autodesk Build | Microsoft Excel | Trimble | Digital Multimeter Data Logging

Use the pipe character ( | ) or commas to separate skills. Do not use tables, text boxes, or bullet-point grids — they break ATS parsing while adding no keyword value.

Keep soft skills out of this section. "Communication," "teamwork," and "problem-solving" belong in your Professional Summary and work experience bullets, woven into measurable context. The Skills section is for hard, verifiable technical capabilities.

Common ATS Mistakes Electricians Make

1. Using field slang instead of standard terminology. On the job site you call it "pulling wire" or "bending pipe." The ATS is looking for "wire installation" and "conduit bending." You say "J-man" — the ATS is matching "Journeyman Electrician." Use formal industry terms in your resume text. You can always talk shop in the interview.

2. Listing "Electrician" as the job title without specifying the type of work. An electrician who writes "ABC Electric — Electrician" and lists generic duties is invisible to an ATS screening for "commercial electrician" or "industrial maintenance electrician." Specify your scope: residential, commercial, industrial, maintenance, construction, low-voltage, or renewable energy.

3. Omitting your license number or burying it in a paragraph. Your state electrical license and IBEW journeyman card are the highest-value keywords in the electrical trade. They belong in a dedicated "Licenses & Certifications" section with the full official title, issuing authority, license number, and expiration date. Writing "Licensed Electrician" without the specifics wastes a critical matching opportunity.

4. Failing to reference the NEC edition you trained on. Electrical code knowledge is not generic. Contractors want to know whether you are current on NEC 2023 or preparing for the 2026 cycle. The NEC is updated on a three-year cycle by the NFPA ⁶, and a resume that mentions "NEC compliance" without specifying the edition looks vague. Write "NEC 2023 compliant" or "Completed NEC 2026 Code Update continuing education."

5. Submitting a designed PDF from Canva or Photoshop. Resumes built in graphic design tools produce PDFs that are functionally images — the ATS extracts zero text. If your resume has colored sidebars, skill-level bar charts, or embedded icons, it is getting parsed as an empty document. Rebuild it in Word.

6. Writing one generic resume for every application. A posting for a residential service electrician emphasizes "troubleshooting," "service calls," "customer interaction," and "panel upgrades." A posting for a commercial construction electrician emphasizes "conduit installation," "three-phase distribution," "blueprint reading," and "crew coordination." These are different keyword profiles. Tailor your Skills section and Professional Summary for each posting — it takes 10-15 minutes and is the single highest-return activity in your job search.

7. Ignoring emerging specializations that employers are actively hiring for. The Infrastructure Investment and Jobs Act has allocated $7.5 billion for EV charging infrastructure through FY2026 ², and solar PV installation is driving 9% growth in electrician employment through 2034 ¹. If you have EVITP certification, NABCEP credentials, or solar installation experience, those keywords must be on your resume. Employers searching for these specializations are finding too few qualified candidates — make sure they find you.

Professional Summary Examples

Your Professional Summary sits directly below your contact information. It should be 3-4 sentences, dense with your highest-value ATS keywords and your most compelling metrics.

Apprentice Electrician (0-4 years)

Electrical apprentice with 3 years and 6,000+ hours of on-the-job training in residential and commercial wiring under journeyman supervision. OSHA 10-Hour Construction Safety certified with NCCER Electrical Level Three completion and current enrollment in IBEW/NJATC apprenticeship program. Experienced in branch circuit installation, EMT conduit bending, panel terminations, and blueprint reading. Pursuing Journeyman Electrician License with expected completion in 2027.

Journeyman Electrician (4-12 years)

Journeyman Electrician (State License #JE-XXXXX) with 9 years of experience in commercial and industrial electrical construction. Completed 50+ projects valued at $500K-$12M, including three-phase power distribution, motor control centers, fire alarm systems, and lighting controls. OSHA 30-Hour Construction Safety certified, NFPA 70E qualified, with zero recordable safety incidents across 18,000+ field hours. Led crews of 4-10 on ground-up construction and tenant improvement projects for hospitals, data centers, and manufacturing facilities.

Master Electrician (12+ years)

Master Electrician (State License #ME-XXXXX) and Electrical Contractor with 18 years of experience delivering commercial, industrial, and renewable energy electrical projects. Managed $45M+ in total project value across 200+ jobs, including data center buildouts, hospital critical power systems, solar PV installations (5kW-500kW), and EV charging infrastructure. IBEW Journeyman Wireman, OSHA 30 certified, NFPA 70E trainer, NABCEP PV Installation Professional, and EVITP certified. Track record of completing projects on schedule and under budget with a 99.2% first-pass inspection rate.

Action Verbs for Electrician Resumes

Generic verbs like "responsible for" and "assisted with" weaken your ATS score and signal inexperience to recruiters. Use these trade-specific action verbs:

Installation & Construction

Installed | Wired | Terminated | Mounted | Routed | Pulled | Fished | Secured | Anchored | Connected | Spliced | Landed | Roughed-in | Trimmed-out | Commissioned

Conduit & Raceway

Bent | Fabricated | Threaded | Cut | Coupled | Strapped | Supported | Hung | Ran | Stubbed

Testing & Troubleshooting

Tested | Diagnosed | Troubleshot | Meggered | Verified | Measured | Traced | Isolated | Identified | Calibrated

Maintenance & Repair

Maintained | Repaired | Replaced | Rebuilt | Overhauled | Upgraded | Retrofitted | Restored | Reconditioned

Management & Coordination

Supervised | Coordinated | Directed | Led | Trained | Mentored | Delegated | Scheduled | Managed | Oversaw

Planning & Documentation

Interpreted | Estimated | Calculated | Designed | Laid out | Specified | Documented | Inspected | Reviewed | Submitted

ATS Score Checklist

Print this checklist. Verify every item before you submit an application.

Format & Structure

• [ ] File saved as .docx (not a designed PDF or scanned image)
• [ ] Single-column layout with no tables, text boxes, or graphics
• [ ] Standard font (Arial, Calibri, Times New Roman) at 10-12pt body text
• [ ] Contact info in body text at the top, not in header/footer
• [ ] Section headings use standard ATS-recognized names
• [ ] Dates include both month and year (not year-only)
• [ ] File named FirstName-LastName-Electrician-Resume.docx
• [ ] No photos, logos, icons, skill-level bars, or decorative elements
• [ ] Resume is 1 page (under 10 years experience) or 2 pages max (10+ years)

Keywords & Content

• [ ] Job title from the posting appears in your Professional Summary
• [ ] 20+ hard skills listed in a dedicated Skills section
• [ ] Electrical systems specified by type (residential, commercial, industrial)
• [ ] NEC edition referenced (NEC 2023 or NEC 2026)
• [ ] All licenses listed with full name, state, and license number
• [ ] All certifications listed with full official names (OSHA 30-Hour, NCCER Level)
• [ ] Tools and test equipment named specifically (Fluke multimeter, megohmmeter)
• [ ] Conduit types specified (EMT, rigid, PVC, flex)
• [ ] At least 10 work experience bullets contain quantified metrics
• [ ] Action verbs start every bullet (no "Responsible for..." or "Duties included...")
• [ ] Safety protocols explicitly mentioned (LOTO, NFPA 70E, arc flash)

Tailoring Per Application

• [ ] Compared your resume keywords against the specific job posting keywords
• [ ] Matched the posting's exact phrasing for key terms
• [ ] Added any required certifications or licenses mentioned in posting
• [ ] Adjusted Professional Summary to reflect the specific role and company type
• [ ] Removed irrelevant experience that dilutes keyword density
• [ ] Included emerging specializations if mentioned in posting (solar, EV, data center)
• [ ] Location information matches the posting's region

Frequently Asked Questions

What is the median salary for electricians, and does ATS optimization improve earning potential?

The Bureau of Labor Statistics reports the median annual wage for electricians was $62,350 in May 2024, with the lowest 10% earning under $39,430 and the highest 10% earning above $106,030 ¹. ATS optimization does not directly raise your hourly rate, but it determines which doors open for you. Electricians who land interviews with data center contractors, industrial facilities, and renewable energy firms consistently earn at the higher end of the pay scale. The median wage for electricians working in power generation and supply exceeded $78,000 in 2024 ⁷. Getting past the ATS at these employers is the gateway to higher-paying positions that walk-on hiring rarely reaches.

Do I need a Master Electrician license to pass ATS screening?

No. Most electrician job postings require a Journeyman license, not a Master license. However, the specific license you hold is one of the most heavily weighted ATS keywords in the trade. Nearly every state requires electricians to complete 8,000 hours of supervised apprenticeship training (approximately 4 years) and pass a licensing examination before working independently ⁸. Your license type, number, issuing state, and status (active/current) should appear prominently in your Licenses & Certifications section. If the posting says "Journeyman Electrician required," your resume must contain those exact words — not "Licensed Electrician" or "Certified Electrician."

Should I list my IBEW membership and classification?

Yes. If you are a member of the International Brotherhood of Electrical Workers, list your local number, classification (apprentice, journeyman wireman, or foreman), and years of membership. The IBEW represents approximately 775,000 active members and retirees across the U.S. and Canada ⁹. For union job calls dispatched through the hall, IBEW membership is mandatory. For open-shop applications, it signals verified apprenticeship completion, standardized training through the NJATC/NECA-IBEW Electrical Training Alliance, and commitment to continuing education. List it as: "IBEW Journeyman Wireman — Local [Number], [City, State]."

How important are OSHA certifications for ATS scoring?

OSHA 10-Hour and OSHA 30-Hour Construction Safety completion cards appear in the "required" or "preferred" section of the majority of electrician job postings from commercial and industrial employers. OSHA does not technically call these "certifications" — they are completion cards issued through authorized outreach trainers ¹⁰. But the ATS does not care about that distinction. If the posting says "OSHA 30 required," your resume must contain "OSHA 30-Hour Construction Safety" verbatim. Beyond ATS matching, OSHA training demonstrates you understand lockout/tagout, arc flash boundaries, fall protection, and the employer's General Duty Clause obligations. If you lack OSHA cards, complete the 30-Hour course — it is available online for under $200 and can be finished in a week.

Should I include EV charging and solar experience even if the job posting does not mention them?

Include them in your master resume, but prioritize them only when the posting mentions renewable energy, EV infrastructure, or sustainability goals. The IIJA allocated $7.5 billion for national EV charging infrastructure through FY2026, and solar installation is cited by the BLS as a primary growth driver for electrician employment through 2034 ¹². Holding an EVITP (Electric Vehicle Infrastructure Training Program) or NABCEP PV Installation Professional credential makes you a candidate for a rapidly expanding segment of the market that has more open positions than qualified electricians. Even when the posting does not explicitly request it, adding a line about EVSE installation or solar PV wiring in your Skills section can trigger keyword matches on postings that list "emerging technologies" or "alternative energy systems" as preferred qualifications.

References

{
  "opening_hook": "The Bureau of Labor Statistics counts 818,700 electricians employed in the U.S. as of 2024, with 81,000 openings projected annually through 2034 — a 9% growth rate that the BLS classifies as 'much faster than the average for all occupations.' Factor in the $7.5 billion the Infrastructure Investment and Jobs Act directs toward EV charging infrastructure alone, and demand for licensed electricians is entering territory the industry has not seen in decades.",
  "key_takeaways": [
    "Mirror the job posting's exact language — ATS platforms match by keyword, so 'conduit bending' must appear verbatim, not 'bending pipe'",
    "Submit a single-column .docx file — tables, text boxes, and graphics break ATS parsing across all major platforms",
    "Quantify every bullet with electrical-specific metrics: panel sizes in amps, conduit runs in feet, circuits per project, dollar values",
    "List every license and certification by full official name with issuing authority and license number",
    "Build a Skills section with 20-30 hard skills organized by category: Electrical Systems, Codes, Tools, Safety, Certifications"
  ],
  "citations": [
    {"number": 1, "title": "Electricians: Occupational Outlook Handbook", "url": "https://www.bls.gov/ooh/construction-and-extraction/electricians.htm", "publisher": "Bureau of Labor Statistics"},
    {"number": 2, "title": "Infrastructure Investment and Jobs Act of 2021 — EV Charging Programs", "url": "https://afdc.energy.gov/laws/infrastructure-investment-jobs-act", "publisher": "U.S. Department of Energy"},
    {"number": 3, "title": "Applicant Tracking System Statistics (Updated for 2026)", "url": "https://www.selectsoftwarereviews.com/blog/applicant-tracking-system-statistics", "publisher": "Select Software Reviews"},
    {"number": 4, "title": "Does the ATS Reject Your Resume? 25 Recruiters Explain What Really Happens", "url": "https://enhancv.com/blog/does-ats-reject-resumes/", "publisher": "Enhancv"},
    {"number": 5, "title": "47-2111.00 — Electricians", "url": "https://www.onetonline.org/link/summary/47-2111.00", "publisher": "O*NET OnLine"},
    {"number": 6, "title": "NFPA 70 — National Electrical Code (NEC), 2026 Edition", "url": "https://www.nfpa.org/product/nfpa-70-code/p0070code", "publisher": "NFPA"},
    {"number": 7, "title": "Occupational Employment and Wage Statistics: 47-2111 Electricians", "url": "https://www.bls.gov/oes/current/oes472111.htm", "publisher": "Bureau of Labor Statistics"},
    {"number": 8, "title": "Electricians: How to Become One", "url": "https://www.bls.gov/ooh/construction-and-extraction/electricians.htm#tab-4", "publisher": "Bureau of Labor Statistics"},
    {"number": 9, "title": "About the IBEW", "url": "https://www.ibew.org/Who-We-Are", "publisher": "IBEW"},
    {"number": 10, "title": "Construction Industry Outreach Training Program", "url": "https://www.osha.gov/training/outreach/construction", "publisher": "OSHA"},
    {"number": 11, "title": "2024 Profile of the Electrical Contractor", "url": "https://www.necanet.org/news-media/detail/press-releases/2024/07/16/2024-profile-of-the-electrical-contractor-reveals-industry-growth-and-shifting-trends", "publisher": "NECA"}
  ],
  "meta_description": "ATS optimization checklist for electricians: 25+ keywords by category, format rules, 15 before/after bullets with metrics, and a 20-point checklist backed by BLS data.",
  "prompt_version": "v2.0-cli"
}